Overview
What anodizing does
Anodizing grows an oxide layer on aluminum rather than applying a coating. It improves corrosion resistance and wear, and it gives a uniform cosmetic surface that paint cannot match on machined edges.
The process is electrically driven, so the alloy matters. 6061 anodizes evenly; 7075 can be less uniform in color and corrosion performance. Castings behave differently again because of their silicon content.
- Type II cosmetic anodizing
- Type III hard anodizing
- Clear, black and custom colors
- Masking for threads and bores
- Sealing after anodizing
- Dimensional allowance considered
Comparison
Type II vs Type III
| Property | Type II | Type III (hard) |
|---|---|---|
| Purpose | Corrosion resistance and appearance | Wear resistance |
| Typical thickness | Thin cosmetic layer | Thicker, harder layer |
| Color | Wide range | Limited range, darker colors |
| Dimensional effect | Small but real | Larger; mask or adjust critical features |
| Best for | Housings, covers, visible parts | Sliding surfaces, wear parts |
Process notes
Alloy, masking and dimensions
Tell us the alloy before you specify the finish. A cosmetic black anodized part in 6061 is a different risk from the same part in 7075 or a casting. If the part is visible, approve a sample before the batch.
Threads, bores and mating faces can be masked so they stay bare. Anodizing adds thickness, so a bore sized to the bare metal may need adjustment if it must remain functional.
- Alloy confirmed
- Masking plan agreed
- Cosmetic faces marked
- Thickness allowance considered
- Sample approved for color
- Sealing specified
Colors and finishes
Applications
Typical parts
Enclosures, brackets, housings, heat sinks, instrument panels and consumer-facing machined components. Anodizing is often paired with laser marking for part numbers and logos.
If the part will be handled or assembled after finishing, tell us. Anodized surfaces can be scratched by hard contact, and packing should protect them.
Anodizing is quoted as part of the finishing package. The route, in-house or through a qualified partner, is confirmed with the quote.