Material
The default aluminum for a reason
6061-T6 is the alloy most machined parts are quoted in. It cuts cleanly, holds a thread, welds well and takes anodizing evenly. For brackets, covers, housings and fixtures, it is usually the lowest-risk starting point.
It is not the strongest aluminum, and it is not the best choice for a highly stressed structural part. When strength matters more than finish or cost, we move to 7075.
- Good machinability
- Excellent anodizing response
- Good corrosion resistance
- Weldable
- Wide stock availability
- Lower cost than 7075
At a glance
| Property | What it means for your part |
|---|---|
| Strength | Medium; adequate for most brackets and housings |
| Machinability | Excellent; clean chips and good surface finish |
| Corrosion | Good in normal indoor and outdoor service |
| Anodizing | Even color and good coverage; Type II or III |
| Welding | Weldable, though machining is often simpler |
| Cost | Lower material cost than 7075 or titanium |
Process notes
Machining and finishing
6061 machines quickly, which is why prototypes can move in days. It also moves when you clamp it, so thin plates and long pockets need a thought-through fixture and a stress-relief step if flatness matters.
Finishing options include bead blasting, Type II anodizing, hard anodizing, powder coating, laser marking and light assembly. Mask threads and bores if the fit is critical.
Grades and finishes we quote
Applications
Typical parts
Typical parts include mounting plates, brackets, enclosures, heat sinks, fixtures and prototype housings. It is also common for parts that will be anodized black or clear.
If the part is cosmetic, tell us which faces are visible. Anodizing highlights scratches and tool marks rather than hiding them.
For thin plates, flatness after machining is a fixturing and stress problem, not just a speed problem.