Overview
What we run, and what we need from you
We machine 3-axis and 5-axis parts, turn and Swiss-machine small components, and cast aluminum housings with secondary machining. The right machine depends on the part envelope, the tolerance and the quantity.
We do not impose a fixed size or volume cap. If a part is larger than our own machine envelope, we quote it through a qualified partner and keep the inspection and shipping responsibility in one place. Send the envelope and the critical callouts; we will confirm the route and where the risk is.
- 3-axis and 5-axis milling
- CNC turning and mill-turn
- Swiss-type machining
- Aluminum die casting and tooling
- Surface finishing and assembly
- Inspection and material certification
Capability
Process envelope
| Process | Typical work | Materials | What to send |
|---|---|---|---|
| 3-axis milling | Plates, covers, brackets, fixtures | Aluminum, steel, brass, plastics | STEP + PDF with tolerances |
| 5-axis milling | Contoured and multi-face parts | Aluminum, titanium, stainless | 3D model + cosmetic surfaces |
| CNC turning | Shafts, pins, bushings, adapters | All machinable metals | Drawing with thread and runout callouts |
| Swiss machining | Small connectors, pins, slender shafts | Stainless, titanium, brass | Drawing + quantity + edge standard |
| Die casting | Housings, covers, structural parts | A380, ADC12, A360, A413 | 3D model + annual volume + machining faces |
| Finishing | Anodizing, coating, passivation, marking | Aluminum, stainless, steel | Finish spec, color, masking notes |
Capacity
No fixed size or volume cap
There is no minimum order and no published monthly capacity ceiling. One part is a normal order; repeat production is scheduled against your delivery dates.
For parts larger than our own equipment, we use a qualified partner for the operation and keep the drawing review, inspection and shipping responsibility with us. You still get one quote, one schedule and one inspection report.
All finishing processes listed on this site are available, either in-house or through a qualified finishing partner. Tell us which process you need and we will confirm the route with the quote.
- No minimum order
- No fixed size cap
- Oversized parts via partners
- One inspection report
- All listed finishes available
- Schedule confirmed per order
Tolerance
Tolerance and inspection
Tolerance capability is feature-specific. A bore, a thin wall and a long slot behave differently, and the measurement method matters as much as the machine. We agree the critical dimensions and the inspection method before production.
If a callout cannot be measured the way it is drawn, we raise it at quoting. That is cheaper than discovering it at first article.
- Datum scheme reviewed
- Critical features identified
- Inspection method agreed
- First article on request
- Material certificates
- Final dimensional report
RFQ
What we need to quote accurately
Send the drawing, the 3D model if available, the material, the quantity and the finish. Tell us the date the parts have to reach you and the destination. If the part is cosmetic, mark the visible surfaces; if it is structural, tell us which loads matter.
For castings, add the annual volume and the faces that will be machined. Tooling and piece price move together, and a quote that only covers one of them is not useful.
No machine list or tolerance table is published because the answer depends on the part. Ask for the capability sheet for your specific drawing.