Overview
Finish is part of the specification
A finish is not a cosmetic afterthought. Anodizing changes dimensional allowance and corrosion behavior. Powder coating hides surface defects and adds thickness. Passivation removes free iron from stainless and affects corrosion resistance. Laser marking is permanent but has to be placed where it will not interfere with a seal or a mating face.
We coordinate finishing with the machining plan so the dimensions that matter are protected and the finish is applied to the right surfaces.
- Anodizing (Type II and Type III)
- Bead blasting and tumbling
- Powder coating and wet painting
- E-coating
- Passivation
- Laser marking and silk screening
Options
Finishes and where they fit
| Finish | Best for | Watch out for |
|---|---|---|
| Anodizing Type II | Aluminum parts needing corrosion resistance and a cosmetic surface | Adds a thin oxide layer; masking and contact points matter |
| Anodizing Type III (hard) | Wear surfaces on aluminum | Dimensional change and color variation between lots |
| Bead blasting | Uniform matte surface before anodizing or coating | Can round sharp edges and affect sealing surfaces |
| Powder coating | Durable color finish on steel and aluminum | Adds thickness; mask threads, bores and mating faces |
| E-coating | Uniform coverage on complex steel parts | Thin but needs good surface preparation |
| Passivation | Stainless parts after machining | Does not remove embedded iron from poor handling; process control matters |
| Laser marking | Part numbers, logos and traceability | Contrast depends on material and finish |
| Silk screening | Graphic and label application | Durability depends on surface preparation |
Specifying
How to specify a finish
Name the standard, the color and the surfaces to be finished. If threads, bores or mating faces must stay bare, mark them. If the part is visible after assembly, say which faces are cosmetic.
For anodizing, specify the type and the color, and tell us if the parts will be handled or assembled afterward; anodized surfaces can be damaged by hard contact.
- Standard and color
- Surfaces to mask
- Cosmetic vs functional faces
- Thread and bore protection
- Thickness allowance
- Handling after finish

Control
Finish, inspect, pack
Finishing is where a good machined part often gets ruined: threads coated, bores reduced, cosmetic faces scratched in transit. We mask what needs masking, check the critical dimensions after finishing and pack parts so they arrive the way they left the finishing line.
If the finish is applied by a partner, we keep the inspection and the shipping responsibility in one place.
- Masking plan agreed before finishing
- Thickness allowance considered
- Post-finish dimensional checks
- Cosmetic inspection
- Protective packing
- Photos before shipment
Beyond finishing
Assembly and kitting
Many customers want parts assembled, labeled and bagged by count rather than shipped loose. We can press in inserts, install hardware, apply labels and pack to a simple work instruction.
Send the assembly drawing and the packaging requirement. If it is not clear, we will ask before we ship a box you have to open and rework.