Overview
Cleaning the surface, not coating it
Passivation removes free iron and contaminants from the surface of stainless steel so the natural oxide layer can form evenly. It is not a coating and it does not hide a rough surface.
Machining, grinding and handling can embed iron particles. If they stay, the part can show rust spots even though the alloy is correct. Passivation is the standard cleanup step.
- Stainless steel only
- Removes free iron
- Improves corrosion resistance
- No dimensional change
- Not a cosmetic coating
- Post-machining and deburring
Specification
When to specify it
Specify passivation when the part will see moisture, cleaning chemicals, food contact or a corrosive environment, or when the drawing or industry standard calls for it.
The process follows machining and deburring. If the part is handled with contaminated tools afterward, the benefit is reduced, so packing matters too.
- Grade and environment confirmed
- After machining and deburring
- Standard or customer spec
- Clean handling after passivation
- Certificate on request
- Packing protection
Limits
What it does not fix
Passivation does not remove deep heat tint, weld scale or a poor surface finish. Those need mechanical or chemical conditioning first.
It also does not turn a 303 part into a 316 part. The alloy still decides the corrosion resistance.
Passivation is quoted with the finishing package; the process and acceptance criteria are agreed with your drawing or standard.