Overview
The difference is the environment
304 is the general-purpose austenitic grade. 316 adds molybdenum, which improves resistance to chlorides and many chemicals. For a dry indoor part, 304 is usually enough. For marine, chemical or repeatedly cleaned parts, 316 is the safer choice.
Both machine similarly, though 316 is a little tougher and more expensive. 303 remains the free-machining option when corrosion is not the main concern.
Comparison
304 vs 316
| Property | 304 | 316 |
|---|---|---|
| Corrosion | Good general resistance | Better in chlorides and chemicals |
| Machinability | Good | Good, slightly tougher |
| Cost | Lower | Higher |
| Passivation | Common | Common |
| Typical use | Food equipment, enclosures, general hardware | Marine, chemical, medical, harsh cleaning |
| Welding | Good | Good |
Decision
How to choose
Start with the cleaning chemicals and the environment. Chlorides, salt and some disinfectants push you to 316. If the part is dry and indoor, 304 is usually fine.
Do not assume 316 is immune to corrosion. It resists more, but it still needs the right surface finish, passivation and cleaning routine.
- Chloride exposure
- Cleaning chemicals
- Temperature
- Cosmetic requirement
- Budget
- Passivation specified
Machining
Machining notes
Stainless work hardens, so sharp tools and consistent feeds matter for both grades. 316 can be slightly tougher, and the difference shows up in cycle time and tool life.
Passivation after machining and deburring is common for both grades. The alloy still decides the corrosion ceiling.