Overview
A durable film, not a thin oxide
Powder coating applies a dry polymer powder and cures it into a continuous film. It hides minor surface variation, adds color and gives good outdoor durability on steel and aluminum.
It is thicker than anodizing, so threads, bores and mating faces usually need masking. The film can also round sharp edges, which matters on precision parts.
- Polyester and hybrid powders
- Standard and custom colors
- Matte, satin and gloss
- Outdoor durability
- Masking for threads and bores
- Cure and adhesion control
Fit
Where powder coating fits
| Consideration | Powder coating |
|---|---|
| Substrate | Steel, aluminum and some castings |
| Thickness | Noticeably thicker than anodizing |
| Appearance | Hides minor surface variation |
| Durability | Good for indoor and outdoor service |
| Masking | Important for threads, bores and fits |
| Best for | Frames, covers, brackets, outdoor housings |
Specifying
Specifying the finish
Name the color standard, the gloss level and the surfaces to be coated. Mark threads, bores and mating faces that must stay bare. If the part is cosmetic, say which faces are visible and whether minor defects are acceptable.
For outdoor parts, tell us the environment. UV exposure, salt and chemicals affect the powder choice, not just the color.
- Color standard
- Gloss level
- Masking plan
- Cosmetic faces
- Edge break before coating
- Environment and UV exposure
Options
Applications
Typical parts
Frames, covers, brackets, outdoor enclosures, machine guards and cast housings. It is often chosen when a durable color matters more than a thin, precise film.
If the part has a critical bore or thread, masking is not optional. Coating a thread changes the fit.
Powder coating is quoted with the finishing package. The route, in-house or through a qualified coater, is confirmed with the quote.