Overview
Turning is about concentricity
CNC turning holds a workpiece in a chuck or collet and cuts it with a stationary tool while the part rotates. That geometry makes it the most efficient way to produce diameters, threads, grooves, tapers and faces that share an axis.
We turn shafts, pins, bushings, spacers, adapters and connectors in stainless steel, cold rolled steel, aluminum, brass and titanium. For small, long parts we move the job to a Swiss-type lathe where the stock is supported at the guide bushing.
- Shafts, pins and bushings
- Connectors and adapters
- Threads, grooves and tapers
- Cross-holes and flats
- Stainless, steel, aluminum, brass
- First article and final inspection
Turned part families
If the critical features are concentric, turning is usually the lowest-cost route.
Capability
Turning capabilities and process fit
| Feature | Typical approach | Notes |
|---|---|---|
| Diameters and steps | Single or multi-axis turning | Roundness and taper checked along the length |
| Threads | Single-point or die head | Metric and inch threads; gauge checked |
| Cross-holes and flats | Secondary milling or mill-turn | Position and burr control agreed on the drawing |
| Tapers and radii | Programmed profile | Finish and blend checked visually and dimensionally |
| Small, long parts | Swiss-type lathes | Guide bushing support reduces deflection |
| Medium batches | Bar-fed turning | Lower handling cost per part |
Materials
Materials and finishes for turned parts
The material choice affects more than price. 303 stainless machines cleanly but is less corrosion resistant than 316. Brass is easy to turn and finishes well. Aluminum is fast but can scratch. Plastics cut easily and move with temperature.
We can include anodizing, passivation, bead blasting, tumbling, laser marking and assembly on the same order, so turned parts arrive ready to fit instead of waiting for a second process.
Process
How a turning job runs
Drawing review
We check datum, thread callouts, tolerances and the features that need a second operation.
Process and quote
Bar stock, machine, fixturing and inspection method are selected before pricing.
Setup and first article
First part is measured against the drawing before the batch continues.
Production
In-process checks on diameters, threads and runout keep the batch consistent.
Finish and ship
Deburring, finishing and count-specific packing, then door-to-door shipping.

Details that matter
Threads, edges and burrs decide the fit
A turned part can hit every diameter and still fail at assembly because a thread is tight or an edge is sharp. We agree the thread gauge, the chamfer and the deburring standard before the first article, then check them through the batch.
For connectors and fittings, the sealing surface and the thread axis matter together. We plan the operations so both are machined from the same reference.
- Thread gauge checks
- Chamfer and edge break consistency
- Runout on stepped diameters
- Burr-free cross-holes
- Sealing surface finish
- Repeatable packing
Cost and tolerance
Tolerance and quantity
Turning can hold tight diameters and good roundness, but the achievable tolerance still depends on the material, the length-to-diameter ratio and the feature. Rather than quote a blanket number, we confirm the specific callouts.
Bar-fed turning becomes more economical as quantity rises because the setup cost is spread across more parts. For one or two pieces, a manual or CNC lathe with a simple setup may be cheaper.
Send the drawing with the quantity. We will quote the process that fits the volume, even when that means recommending a different one.