Work examples
Connectors, adapters and fittings turned to print
Connectors and adapters combine turning with secondary operations: cross-holes, flats, slots, threads and sometimes a sealing surface that has to be smooth and perpendicular to the axis.
We machine these features in as few setups as the geometry allows, then check thread fit and the features that affect assembly. If a part needs a specific finish on a sealing face, say so on the drawing; it changes the process.
- Metric and inch threads
- Cross-holes and flats
- Sealing surfaces
- Deburring of internal edges
- Anodizing or passivation
- Assembly-ready packing
Shop notes
Sequence decides whether the thread survives
Connectors are small assemblies in one part: a thread, a seal, a cross-hole and a flat. The sequence matters. Threading before the cross-hole can leave a burr inside the thread; drilling first can distort it. We plan the order and verify the thread with a gauge.
Next step
Need a part like this?
Send the drawing and the quantity. We will confirm the process, the finish and the inspection method, then quote the part with a real lead time.
This gallery shows previous work; it is not a catalog. Every part is made to a customer drawing.
Same process, same shop: machining, finishing and inspection under one roof.











