Material
Different rules from metal
Plastics cut easily but behave differently: they move with temperature, burr instead of chip, and scratch if handled carelessly. The machining plan has to account for clamping pressure and heat, not just the toolpath.
POM is the general-purpose choice for mechanical parts. ABS is common for enclosures and prototypes. PEEK is for high temperature, chemical resistance or wear, and it costs accordingly.
- POM for mechanical parts
- ABS for enclosures and prototypes
- PEEK for high temperature and chemicals
- Soft jaws and controlled clamping
- Hand deburring or tumbling
- Clean packing
At a glance
| Property | What it means for your part | |
|---|---|---|
| POM (acetal) | Low friction, good dimensional stability | Guides, wear parts, insulators |
| ABS | Easy to machine, low cost | Enclosures, prototypes, covers |
| PEEK | High temperature and chemical resistance | Wear parts, insulators, demanding service |
| Machining | Sharp tools, controlled heat, light clamping | Avoid melting and stress |
| Finishing | Hand deburr, tumble, bead blast | Avoid scratching visible surfaces |
Process notes
Machining and finishing
Sharp tools and free-cutting geometry reduce heat. Clamping pressure can leave marks or distort thin walls, so soft jaws and light pressure are standard.
Deburring is usually by hand or a controlled tumble. For cosmetic parts, tell us which surfaces are visible before we choose the method.
Grades and finishes we quote
Applications
Typical parts
Typical parts include insulators, guides, wear pads, covers, prototype housings and low-weight structural components.
If the part will see heat or chemicals, tell us the service conditions. Plastic grade selection is more application-specific than aluminum.
Plastic parts can measure perfectly and still fail on a sharp edge. Deburring is part of the specification.