Material
The easiest metal to turn and thread
Brass C360 is a free-cutting alloy that machines faster than steel or stainless and holds a clean thread. It is common in fittings, connectors, valves and electrical components.
It is not the strongest material, and it tarnishes if left bare. For exposed parts, a clear coating or a plated finish is usually added.
- Excellent machinability
- Clean threads and fine detail
- Good electrical conductivity
- Tarnishes when bare
- Lower strength than steel
- Takes decorative finishes
At a glance
| Property | What it means for your part |
|---|---|
| Machinability | Excellent; fast cycles and good finish |
| Strength | Moderate; not for highly loaded parts |
| Conductivity | Good electrical and thermal conductivity |
| Corrosion | Good indoors; tarnishes outdoors |
| Finishing | Polishing, plating, clear coating, laser marking |
| Typical use | Fittings, connectors, valves, electrical parts |
Process notes
Machining and finishing
Brass cuts freely and produces small chips, which makes it friendly to automatic turning and Swiss machining. Threads come out clean, and fine detail holds well.
Bare brass will tarnish. If the part is visible, specify a clear coat, nickel or another finish; if it is internal, bare may be fine.
Grades and finishes we quote
Applications
Typical parts
Typical parts include hose fittings, electrical connectors, valve bodies, terminals and decorative hardware.
For electrical parts, tell us the conductivity requirement. For plumbing, tell us the applicable standard so the alloy and finish match.
Brass is easy to machine but not automatically the cheapest if the part will need plating.