The problem
Where automation projects get stuck
The robot arrives on time. The gripper does not. End-effectors, mounting plates and fixtures are usually the last parts designed and the first parts needed, and they have to fit a robot flange, a sensor and a part that may still be changing.
We machine those parts quickly, in aluminum or steel, and we quote revisions without treating every change as a new project.
- End-effector mounting plates
- Gripper jaws and fingers
- Sensor brackets and camera mounts
- Fixtures and nest plates
- Aluminum 6061 and 7075
- Anodizing and laser marking
Parts we make
Typical automation parts
| Part | Material | Finish | What matters |
|---|---|---|---|
| Robot flange adapter | 6061-T6 aluminum | Anodized, laser marked | Bolt pattern, flatness, concentricity |
| Gripper jaw | 7075 or steel | Hard anodized or bare | Wear resistance, repeatable clamping |
| Camera bracket | 6061 aluminum | Black anodized | Stiffness and mounting position |
| Nest / fixture plate | 6061 or steel | Anodized or coated | Flatness, hole position, repeatability |
| Conveyor guide | POM or aluminum | Bead blasted | Edge finish and wear |
Materials
Why aluminum is usually the right start
Aluminum is light, fast to machine and easy to anodize. For a robot arm, weight at the end effector reduces payload, so aluminum is often the default. When wear or stiffness matters, we move to steel or a harder aluminum grade.
Anodizing adds corrosion resistance and a durable cosmetic surface, but it changes dimensions slightly. Threads and bores can be masked if the fit is critical.
- 6061-T6 for general parts
- 7075-T6 for higher strength
- Steel for wear parts
- Hard anodizing for sliding surfaces
- Masking for critical threads
- Laser marking for part IDs
Process
Fast iteration without losing the thread
Send the CAD
STEP plus a drawing with the bolt pattern and any fit-critical dimensions.
Quote and DFM
We flag features that will be slow or expensive and suggest simpler alternatives.
Prototype
Machined in days, so the robot cell can be tested before the design freezes.
Revise
Rev changes are tracked, and repeat orders stay tied to the correct model.
How we work
Working with an automation team
Automation schedules are short. We keep quotes fast, answer questions directly and ship small batches without treating them as a nuisance. If a design change is coming, tell us; we can leave stock on the part or quote both revisions.
We sign NDAs for cell designs and customer end products, and we do not display customer projects publicly.