Overview
Why machine a prototype
A 3D printed part confirms the shape. A machined prototype confirms the material, the thread, the fit and the finish. When the prototype has to be tested in the actual environment, machining from the production alloy is often the fastest way to get a real answer.
We machine prototypes from aluminum, stainless, brass and engineering plastics, usually in one to five working days depending on complexity and finish. Simple parts can move in a day when the material is in stock.
- Real production materials
- Threads, fits and finishes
- One to five working days typical
- Simple parts in a day when possible
- DFM feedback with the quote
- Confidentiality and NDA support
Prototype routes
Process
From concept to testable part
Send what you have
A STEP file, a sketch or a drawing with assumptions. We quote from what exists, and we label the assumptions.
Choose material and finish
Match the production intent or pick a cheap material for form and fit testing.
Machine and inspect
Critical dimensions are checked against the drawing; a photo report can be sent before shipping.
Iterate
Rev changes are tracked, and repeat prototypes can be produced from the updated model.
Practical notes
Prototype tolerances and finishes
Prototype tolerances should match what the part needs to prove, not the tightest number on a generic title block. If the prototype only checks fit, a looser tolerance may be fine and cheaper. If it is going into a test rig, the critical dimensions need to be real.
Finishes can be applied to prototypes: anodizing, bead blasting, powder coating and laser marking. If the finish affects fit or function, include it before testing.
- Specify the dimensions the test depends on
- Confirm surface finish before assembly
- Include threads and inserts
- Plan for heat treatment if it changes size
- Decide whether cosmetic defects matter
- Keep the rev and the model matched
Honest advice
When not to machine a prototype
If the part is a large housing with internal ribs, machining it from billet can be expensive and the result will not behave like a casting. A 3D printed form model plus a cast sample may be a better path.
We will tell you when a prototype is better served by another process, even though it means less machining work for us.