Overview
Small parts, high expectations
Medical device hardware often combines small size, thin features and edges that must be smooth. A burr that would be acceptable on an industrial bracket is a problem on an instrument that a clinician handles.
We machine instrument components, housings, brackets and small mechanisms in stainless steel and titanium, then deburr, passivate and inspect to the drawing. We are a machining supplier, not a medical device manufacturer, and we do not claim ISO 13485 certification.
- 304 and 316 stainless
- Titanium Grade 5
- Small turned and milled parts
- Deburring and edge control
- Passivation
- Material certificates and inspection reports
Deburring
Edge quality is a process, not a final step
Deburring is planned with the machining operation. Cross-holes, slots and thread exits are the usual places where a burr hides, and they are checked before the part moves to finishing.
If the drawing calls for a specific edge break or a polished surface, say so. The process and the inspection method change when the edge is functional rather than cosmetic.
- Cross-hole burr removal
- Thread exit cleanup
- Edge break to drawing
- Passivation after machining
- Visual inspection under magnification
- Protected packaging
Part types
Typical medical hardware parts
| Part | Material | Process | Notes |
|---|---|---|---|
| Instrument handle | 316 stainless | Turning and milling | Edge quality and cleanability |
| Housing | 6061 or 316 | Milling | Sealing faces and flatness |
| Small mechanism | Titanium | Swiss machining | Small features and burr control |
| Bracket / mount | 304 stainless | Milling | Position tolerances and finish |
| Prototype instrument | Aluminum or stainless | Machining | Fast iteration before tooling |
Paperwork
Documentation
We provide material certificates, dimensional inspection reports and certificates of conformance on request. If your quality system needs a specific form, send it with the order and we will complete it.
For designs that may become a regulated product, involve your quality and regulatory team early. Machining a prototype is easy; changing a validated process later is not.