Overview
From prototype bracket to production housing
Automotive programs usually need two things at once: a part that passes validation and a unit cost that works at volume. Machining from billet is the fast route for prototypes and low volume. Die casting plus machining is the route when the annual volume justifies tooling.
We quote both routes when the quantity is uncertain, so the decision is based on total cost rather than a single piece price.
- Aluminum die casting and tooling
- CNC machining of castings
- Billet machining for prototypes
- Coatings and anodizing
- First article and dimensional reports
- Door-to-door shipping
Routes
Process route by volume
| Stage | Typical route | Why |
|---|---|---|
| Prototype | CNC machining from billet | No tooling, fast revisions |
| Bridge production | Machining or low-volume tooling | Supports validation builds before production tooling |
| Production | Die casting plus machining | Lower piece price and repeatable process |
| Aftermarket / low volume | Machining from billet or sand casting | Tooling cost may not be justified |
Materials
Materials and finishes
A380 and ADC12 are the workhorse die casting alloys for housings and brackets. For structural parts, alloy and wall thickness are reviewed with your engineer. Coatings protect castings in under-hood and exterior environments, and machined sealing faces are protected during finishing.
If the part needs a specific corrosion test or coating specification, include it in the RFQ. We will confirm what we can support before quoting.
- A380 and ADC12 castings
- 6061 and 7075 billet parts
- Powder coating and e-coating
- Anodizing for aluminum
- Thread and bore masking
- Dimensional reports
Documentation
Documentation for automotive buyers
We provide first article inspection reports, dimensional reports and material certificates. PPAP-style documentation can be discussed for production programs; the scope and timing should be agreed before the order, not after.
We do not claim IATF 16949 certification. If your program requires it, we will tell you honestly that we do not hold it, and you can decide whether our ISO 9001 system and inspection plan meet your needs.